The OND-6100S Ultrasonic Flaw Detector

The OND-6100S Ultrasonic Flaw Detector are used widely in various lines. It is of practicle usage and portable convenience

 6100s digital ultrasonic flaw detector

Introduction:

The OND-6100S digital ultrsonic flaw detector offers state-of –the-art technology in a package that is compact and lightweight 1.28kg. It is a full-featured and reliable instrument which can be used in various industries. Suitable for various detection demands of forged pieces, welding lines, airplane parts.

The OND-6100S adopts an embedded computer system and a super large-scale field programmable IC design, which combine all good performance of a large ultrasound system in a very small space: at least 65dB detection sensitivity surplus will meet detection demand for large forged pieces or coarse-crystal material; LAN Ethsmet port for real-time communication with a PC(Host) and remote control; Cine loop function for recording the dynamic scanning process; The new-type color TFT LCD results in optimize read & measure effect and visual comfort; The simple but convenient surface wave tracking function is good for immersion detection; Together with new techniques and new function such as DAC, RF echo display, large memory and USD port, the OND-6100S becomes a handy ultrasonic flaw detector with excellent performance. Furthermore, the fast response time of the color TFT LCD enables display of last scanning echoes; the touch keypad is reliable and comforatble for use; its outstanding EMC design significantly increases field anti-interference of the system.

Main feasures:

Transmitter	Pulse Square Wave Pulser Transmitter Pulse Voltage:25-400V, continuously
Test Modes	Pulse echo and dual transmission
Damping	400. 80 Ohm
Frequency	0.5-20MHz, Broadband/narrowband optional
Gain	0.0-110.0dB. Steps as 0.1,1.0,2.0,6.0dB
Material Velocity	1000-15000m/s continuously adjustable, 30 common material velocities selectable
Range	0.0-10000mm longitudinal wave at steel velocity. Range continuously variable with minimum 0.1mm increments.
Rectification Alarm	Positive halfwave, negative halfwave, full wave, RF Real-time alarm signal indicated by horn or LED indicator.
Display	5.7” high-brightness TFT color LCD
Pulse Shift	-20~3000μs
Probe Zero Offset	0-999.9μs
Pulse Repetition Frequency(PRF)	25-1000Hz, auto and manual adjustment modes optional
Vertical Linearity Accuracy	≤3%
Horizontal Linearity Accuracy	≤0.1%
Surplus Sensitivity	≥65dB(200Φ2 flat bottom hole)
Resolutions	≥36dB
Dynamic Range	≥32dB
Reject(suppression)	0~90%
Electric Noise Level	<10%
Interface	C6 transducer connections, USB HOST, LAN, RF OUT, Two-dimensional encoder interface
Power Supply	Large-capacity Li Battery, no memory effect: Battery Operating time: More than 6 hours
Environmental temperature	-30~50°C
Relative Humidity	20%~95%RH
Weight	1.28kg(with battery)

Main Specifications:

♦Small dimension, lightweight, portable, fully-sealed, highly-reliable design especially suitable for working outdoors.

♦Up to 640MHz sampling frequency, measurement resolution of 0.1mm with minimum range of 3mm.

♦Operating Frequency: 0.5 20MHz, surplus sensitivity up to 65Db

♦Bright, high resolution(640×480) color TFT display realizing the best measurement result in similar products

♦High performance square wave pulser with tuning option allows the operator to tune the pulse width of the square wave pulser to optimize transducer performance. This maximizes signal-to-noise and penetration in difficult materials such as highly-attenuated materials or thin work-pieces.

♦LAN port allows remote data transfer and management. It provides management to instrument parameters when the instrument is used as independent square wave pulser.

♦High-speed USB interface allows data storage on USB drive and PC communication. To interface with a mouse to secure accurate analysis on report with A-scan.

♦Internal charger, auto switch between “charge” and “work”. Power supplied by battery or AC mains. The operating time of onboard Li battery is more than 6 hours.

If u have any question, pls feel free to contact me!

The OND-6100S Ultrasonic Flaw Detector